Installation Guide
Preparation
-
Clean the Vehicle:
- Thoroughly clean the vehicle, focusing on the area where the product will be applied.
-
Avoid Wax/Polish:
- Do not use any polish or wax-based cleaning products, as they may interfere with the adhesive.
-
Use Adhesive Promoters (Optional):
- We recommend using 70% isopropyl alcohol or an adhesive promoter to improve adhesion.
- Be cautious—overuse may damage your clear coat or paint.
Lining Up and Installation (Garage or dust-free, rain-free area recommended)
Positioning with Masking Tape:
- Before removing the backing tape, test-fit and align the product using masking tape to hold it in place.
- This ensures proper alignment and prevents movement during installation.
Preparing the Adhesive:
- Peel back 2-3 cm of the backing tape and fold it upwards.
- This allows for easy removal of the rest of the backing tape during final installation.
Final Installation:
- Once the adhesive touches the surface, press firmly to ensure a secure attachment.
Clips or Hooks (If Applicable):
- If the product includes clips or hooks, ensure they are properly and securely attached.
- These components help support and hold the product in place.
Post-Installation Care:
- Do not wash your vehicle for a few days to allow the adhesive to fully set.
- Keep the vehicle away from harsh weather conditions during the curing period.
